VENT HEATING ELEMENTS eVA125

Vent heating elements are used in areas with modern home ventilation technology employing heat recycling and provide incoming air re-heating directly at the inflow opening of the respective room.

Within an HRV system, they assume the remaining heat needs for the

entire heat output during the cold periods - with individual room control.

They are used in simple ventilation systems to avoid cold air drafts.

AREAS OF APPLICATION

i

i

PRODUCT DESCRIPTION

Connection housing

Outer collar

Air velocity attachment

Heating element attachment

Disc attachment

Annular gap restrictor

The connection housing is for the connection of air lines and the power supply as well as for accommodating the heating element attachment. The electrical cable line lies outside the air pipe.

It is attached in a 125mm air pipe using tension wedges.

CONNECTION HOUSING

Multipoint connector for connection to the power supply incl. cover

i

Screws (3x) for using the tension grips

i

Straight edges with groove marks for alignment

i

Cutting mark for cutting off the connection pipe

i

Tension grip in park position

Tension grip in clamped position

i

Lip seal

i

OUTER COLLAR

The outer collar assumes the airflow together with the disc vent attachment and the

characteristic bezel with disc vent - alternatively with air velocity attachment.

The outer collar makes flush installation possible on the attachment level

or a shadow joint setting.

HEATING ELEMENT ATTACHMENT

Graduation for setting the shadow joint

Shadow joint

(0.0 mm / 0.5 mm /

1.0 mm / 2.0 mm)

i

Contact protection screen

i

By completely pushing the heating element into the connection housing a connection to the power supply is created.

Function display

i

Screw (2x) for mounting in the connection housing

i

PTC Register

i

Circuit board with bridge for power adjustment, overload protection, flow and temperature cutoff

i

Openings, plugs for controlled bypass

i

Temperature switch (option)

i

DISC ATTACHMENT

The disc vent attachment with an air outlet angle of 360° is used for ceiling mounting. The disc attachment has lock positions through which the air outlet gap can be set in 1mm graduations.

Hollow back for mounting on heating element attachment (5 lock positions)

Reproducible setting through the use of graduated grooves

i

AIR VELOCITY ATTACHMENT (SLOT BEZEL)

Window for reading the

setting positions

i

Preset breaking point B-B for reducing the RSB by 30°

i

Preset breaking point A-A for reducing the RSB by 30°

i

In the case of wall mounting of the vent heating element, the velocity attachment with a slot bezel is used. A relatively large air velocity can be attained through restriction of the outlet slot.

Locking groove in heating element attachment

i

PRODUCT VARIATIONS

Connection housing

Outer collar

Heating element attachment

Annular gap restrictor

Disc attachment

Air velocity attachment

eVA 125

5x3CT130-U TV

article no. 70273

●

eVA 125

5x3CT130-U WV

article no. 70274

●

Series Type

TECHNICAL DATA

Series Type

Unit

eVA 125

5x3CT130-U TV

article no. 70273

eVA 125

5x3CT130-U WV

article no. 70274

Type of installation

Installation diameter / Diameter air connection

Installation depth

Mounting / Fixing

Volume flow (max.)

Performance

Volume flow

Performance zone 1…5 (TE 20°C)

Performance zone 1, 2 and 5 (TE 20°C)

Performance zone 1…5 (TE 30°C)

Performance zone 1, 2 and 5 (TE 30°C)

Pressure loss

mm

m³/h

W

Pa

Ceiling

125

47,5

Traction claw (3x)

60

15 … 35

238 … 339

132 … 170

223 … 307

123 … 155

7 … 30

Wall

125

47,5

Traction claw (3x)

60

15 … 35

238 … 339

132 … 170

223 … 307

123 … 155

7 … 30